Navilock NL-82002U USB 2.0 Multi GNSS UDR Receiver, u-blox NEO-M8U chipset, 1.5 m, blackThe USB 2.0 Multi GNSS UDR receiver by Navilock based on u-blox NEO-M8U chipset has a built-in active antenna as well as high-sensitivity sensors such as a 3D accelerometer and a 3D gyroscope. In conjunction with a laptop, a reliable position determination is also possible when the GNSS signal is interrupted.NoteThe manual contains essential installation and commissioning conditions for the successful operation of this GNSS receiver!• Connector: USB 2.0 Type-A male• Chipset: u-blox NEO-M8U• Frequency: GPS: L1, 1575.4200 MHz GLONASS: L1, 1602 (k x 0.5625) MHz BEIDOU COMPASS: B1, 1561.0980 MHz GALILEO: E1, 1575.4200 MHz QZSS: L1, 1575.4200 MHz• Accepts the signals of up to 72 satellites at the same time• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG• Supports UDR from NMEA 4.1• Auto Baud Rate up to 115200 bps• Update rate: up to 20 Hz• Sensibility max. -160 dBm• IPX6 protection class• Magnetic, non-slip on the bottom• LED-indicator for GPS status• Operating temperature: -20 °C ~ 60 °C• Cold start in ca. 26 seconds• Hot start in ca. 1 second• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS• Cable length: ca. 1.5 mSystem requirements• Windows Vista/7/8/8.1/10, Linux Kernel 2.6• PC or laptop with a free USB Type-A port• For devices with OTG function and optional OTG adapter: Windows 10Package content• USB 2.0 receiver• Navilock support CD incl. driver and user manualDimensions (LxWxH): 65x45x22 mm